Installation For Use With Non-Invasive Ventilation - Aerogen Solo Manuel D'utilisation Du Système

Installation for use with Non-Invasive
Ventilation
The Aerogen Solo is suitable for use with non-invasive ventilation in a dual
limb circuit as shown in Figures 5, 7, 8 & 9.
The Aerogen Solo can be used with single limb NIV circuits using non
vented masks where the nebuliser can be placed between the exhalation
port and the patient as shown in Figure 11.
Exhalation
Port
Figure 11. Connecting the Aerogen Solo to a non-invasive single limb circuit
20
Aerogen®