2. The Aerogen Solo can be placed between the ventilator and the dry
side of the humidifier. Figure 7 illustrates a set up for the Aerogen Solo
at the dry side of the humidifier. The Aerogen Solo can be used with a
nasal interface in this configuration.
Figure 7. Aerogen Solo on dry side of humidifier
3. The Aerogen Solo can be placed between the wye and endotracheal
tube as shown in Figure 8. The Aerogen Solo can be used with a Heat
and Moisture Exchange Device (HME) which may contain a filter.
Figure 8. The Aerogen Solo placed between the wye and endotracheal tube.
16
Aerogen®