Krick RoMarin FLB 1 Mode D'emploi page 62

Radar beams and portholes
No. Description
4.24 Radar platform
4.25 Support
4.26 Side part
4.27 Side glazing
4.28 Front glazing centre
4.29 Front glazing side
4.30 Rear glazing
4.31 Portholes
4.32 Glazing portholes
4.33 Chequer plate
4.34 Roof
4.35 Funnel rounding
Next, assemble the bridge for the radar and the speakers.
4.25
4.26
Fig.: Bridge between the funnels for radar and speakers
Insert the bridge into the recesses in the funnels and glue it in place.
Status 25. August 2022
Laser part
Laser part
Laser part
Vivac
Vivac
Vivac
Vivac
Laser part
Vivac
Laser part
Laser part
Ready made
4.24
4.35
Fig.: Arranging funnels on superstructure
Cut the glazing 4.27 - 4.30 to size and glue it from the
inside behind the window openings of the
superstructure. Tacky Glue, order no. 44142, or RC
Modeller Canopy Glue, order no. 44126, is suitable for
this.
20
Dimensions Qty.
Laserpl. 1,5
Laserpl. 1,5
Laserpl. 1,5
0,7 see Drawing
0,7 see Drawing
0,7 see Drawing
0,7 see Drawing
Laserpl. 1
0,7 * 15 * 170 mm
Laserpl. Chequer
Laserpl. 1
3D Print
1
2
2
2
1
2
1
12
2
1 BSR
1
2
© Krick Modelltechnik