Ready Made M3; Ready Made D 3 - Krick RoMarin FLB 1 Mode D'emploi

Rudder steering
No. Description
2.9 Rudder arm
2.10 Collar
2.11 Cheese head screw
2.13 Servo
2.14 Servo lever
2.15 Rudder linkage
2.16 Adjusting collar
2.17 Grub screw
Push the rudder through the rudder tube.
Attach rudder arm 2.9 - 2.11. Press the rudder slightly from below and tighten screw 2.11.
Put the servo 2.13 in neutral position. Drill out the servo lever to 2 mm and attach it to the servo.
Screw the servo into the servo mount Mount the holder onto the RC plate.
Hook the rudder linkages 2.15 into the servo arm and the rudder arm. Slide the adjusting collar onto the rudder
linkages, adjust the distance and tighten the grub screw.
2.15
2.16-2.17
Fig.: Installing the rudder linkage
Status 25. August 2022
2.15
2.16 – 2.17
Dimensions
Ready made
Ready made D 7 * D 3 * 5
Ready made M3 * 10
Ready made
Ready made
Steel wire D 2 * 135 einst. Zkr
Ready made D 7 * D 4 * 5
Ready made D 3 * 3
7
Qty
1
1
1
1 n.e.
1 n.e.
2
1
1
2.9
2.11
2.8
© Krick Modelltechnik
2.10