CAME ZLX24MA Mode D'emploi page 84

Signal maintenance
Set the colour of the fl ash on enabled BUS devices (fl ashing beacons and selectors) when maintenance is necessary. With the
function activated, these devices will signal that maintenance needs to be carried out at the start of each manoeuvre.
Maintenance must be confi gured [Function F58].
The function only appears if there is a BUS fl ashing beacon or a BUS selector connected.
b43
When using a CAME KEY device, always update the board fi rmware to the latest version.
Import/export data
Save user data and system confi guration data on a MEMORY ROLL card.
The stored data can be reused for another control board of the same type to carry across the same confi guration.
Before inserting and removing the MEMORY ROLL card, DISCONNECT THE MAINS POWER SUPPLY TO THE LINE.
1
Insert the MEMORY ROLL card into the corresponding connector on the control board.
2
Press the "Enter" button to access programming.
3
Use the arrows to choose the desired function.
The functions are displayed only when a MEMORY ROLL card is inserted.
F50 -Save data
Save user data, timings and confi gurations to the memory device (memory roll).
F51 -Read data
Upload user data, timings and confi gurations to the memory device (memory roll).
Once the data have been saved and loaded, the MEMORY ROLL can be removed.
0 =Deactivated (Default)
1 = White
2 = Yellow
3 = Orange
4 = Red
5 = Purple
6 = Blue
7 = Light blue
8 = Green