Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Remove user
Remove one of the registered users.
U2
Remove all
Remove all registered users.
U3
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters
saved previously will be deleted.
U4
Self-Learning Rolling
Save a new rolling code transmitter by activating acquisition from a rolling code transmitter that has already been saved. The
saving and acquisition procedures are explained in the transmitter manual.
U8
Motor type
Set the type of gearmotor installed on M1 and M2.
A1
No. 1 > 250
Use the arrows to choose the number associated with the user you want to remove.
Alternatively, the control device associated with the user you want to remove can be
activated.
Press ENTER to confi rm.
"CLr" will appear to confi rm deletion.
OFF (Cancel operation)
ON (Run operation)
1 = All decoding (default)
2 = Rolling code
3 = TW key block
OFF (Default)
ON
0 = Generic
1 = STYLO-ME
2 = STYLO-RME
3 = FTX
4 = FAST-70
5 = AXI
6 = AMICO
7 = FERNI
8 = FERNI-V
9 = AXO
10 = A3024N/A5024N
11 = FROG-A24
12 = FROG-A24E (Default)
13 = ATS
14 = F1024
15 = F4024E
16 = F4024EP
Publicité
Table des Matières
