CAME ZLX24MA Mode D'emploi page 83

<Closing colour> BUS fl ashing beacon
Set the BUS fl ashing beacon colour during gate closing.
The function only appears if there is a BUS fl ashing beacon connected.
b40 >
<Pre-fl ashing colour> BUS fl ashing beacon
On the BUS fl ashing beacon, set the fl ash colour for before opening and closing manoeuvres (pre-fl ash).
The function only appears if there is a BUS fl ashing beacon connected.
b40 >
<Signal error> BUS fl ashing beacon
Set the colour of the BUS fl ashing beacon in the event of an error signal.
The warning light is activated after sending a command for movement.
The function only appears if there is a BUS fl ashing beacon connected.
b40 >
L3
L4
L5
1 = White (Default)
2 = Yellow
3 = Orange
4 = Red
5 = Purple
6 = Blue
7 = Light blue
8 = Green
1 = White (Default)
2 = Yellow
3 = Orange
4 = Red
5 = Purple
6 = Blue
7 = Light blue
8 = Green
0 =Deactivated (Default)
1 = White
2 = Yellow
3 = Orange
4 = Red
5 = Purple
6 = Blue
7 = Light blue
8 = Green