Rapid Heating; Setting The Clock; Setting The Timer; Childproof Lock - Siemens HB331 0 Serie Notice D'utilisation

Four encastrable
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
2.
Use the temperature selector to set the temperature.

Setting the clock

When the appliance is connected for the first time or after a
0
power cut, the
symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
S
1.
Press the
S
Timer button.
The
symbol flashes.
2.
Use the - or + button to change the timer duration.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
the display. You will see the time counting down.
When the time has elapsed
A signal sounds. Press the

Childproof lock

Oven

The oven has a childproof lock to prevent children switching it
on accidentally.
Switching the childproof lock on and off
The function selector must be switched off.
To switch on: press and hold the
symbol appears in the display. This takes about 4 seconds.
To switch off: press and hold the
symbol goes out.
Notes
You can set the timer and clock at any time.
If the childproof lock is active, it will be cancelled following a
power cut.
8
I
.
S
symbol lights up in
S
Timer button. The timer goes out.
C
key button until the
C
key button until the
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
Setting procedure
0
Press the
Clock button.
1.
12.00 appears in the display and the
2.
Use the + or - button to change the clock.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
0
Press the
Clock button twice and change the time using the
+ or - button.
Changing the timer duration
S
Press the
Timer button. Use the + or - button to change the
time.
Cancelling the setting
S
Press the
Timer button. Press the - button until zero is shown
on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting
down in the display.
x
To call up the
clock:
0
Press the
Clock button repeatedly until the relevant symbol
appears.
The value you are checking appears for several seconds on the
display.
C
C
0
symbol flashes.
y
remaining cooking time,
0
symbol goes
0
end time or

Publicité

Table des Matières
loading

Table des Matières