Care And Cleaning; Cleaning Agents; Detaching And Refitting The Rails - Siemens HB331 0 Serie Notice D'utilisation

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Stainless steel
Wipe the appliance with plenty of water and
fronts
some washing-up liquid. Always wipe parallel
to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less steel cleaner from our after-sales service
or from specialist retailers.
Enamel sur- Wipe the appliance with some washing-up liq-
faces and lac- uid and warm water. Dry with a soft cloth.
quered
surfaces
Knobs Wipe the appliance with some washing-up liq-
uid and warm water. Dry with a soft cloth.
Glass panel
Can be cleaned with glass cleaner. Do not
use any abrasive cleaning agents or sharp
metal objects. These could scratch and dam-
age the surface of the glass panel.
Seal Wipe with a damp cloth. Dry with a soft cloth.
Inside the Clean with hot water or vinegar solution. For
oven heavy soiling: Only use oven cleaner on cold
surfaces.
Glass cover on Wipe the appliance with some washing-up liq-
the oven light
uid and warm water. Dry with a soft cloth.
Accessories Soak in hot soapy water. Clean with a brush
or a sponge.
Aluminium Do not clean in the dishwasher. Never use
baking tray oven cleaner. To avoid scratches, never touch
(option) the metal surfaces with a knife or similar
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft
cloth. Do not use any abrasive materials,
scouring sponges or rough cleaning cloths.
They could scratch the baking tray
Childproof
If a childproof lock has been fitted on the
lock (option)
oven door, it must be removed before clean-
ing. Soak all plastic parts in hot soapy water
and wash with a sponge. Dry with a soft cloth.
If very dirty, the childproof lock will not work
properly.
Hob Information on care and cleaning can be
found in the instruction manual for you oven.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
Hold the shelf frames from underneath and pull slightly
1.
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
Then fold the rails upwards and carefully remove them
2.
(Fig. B).
$
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
Installing the frames
1. Insert the two hooks carefully into the upper holes. (Figure A-
B)
$
%
%
9