Time-Setting Options - Thermador Masterpiece Série Mode D'emploi

Separating the two elements
Select one of the two elements in the flexible cooking
zone and touch the JOIN I SPLIT touch key.
This deactivates the flexible cooking zone. The two
elements will now function independently.
Notes
If the element is switched off, and then switched back
▯
on again later, the flexible cooking zone is reset to
function as two independent elements.
To change the configuration settings for the flexible
▯
cooking zone, refer to the section on ~ "Basic
settings"

Time-setting options

Your cooktop has three timer functions:
Programming the cooking time
▯
Kitchen timer
▯
Stopwatch function
▯
Programming the cooking time
The element automatically switches off after the set time
has elapsed.
Setting procedure:
1. Select the element and the required power level.
Touch the COOK TIMER touch key. The
2.
and the indicator light up in the Timer display.
y
lights up in the display for the element.
3. Within the next 10 seconds, set the required cooking
time using the number keys.
14
4. Touch the COOK TIMER touch key to confirm the
selected setting.
The cooking time begins to elapse.
Notes
The same cooking time can be set automatically for all
▯
elements. The set time for each of the elements counts
down independently.
You can find information on automatically
programming the cooking time in section on "Cook
time".
If the flexible cooking zone is selected as the only
▯
element, the set time for the entire cooking zone is the
same.
If the HeatShift™ function is selected for the combined
▯
cooking zone, the set time for the three elements is the
same.
Changing or deleting the time
Select the element and then touch the COOK TIMER
touch key.
Change the cooking time using the number keys or set
‹‹
to delete the programmed cooking time.
Touch the COOK TIMER touch key to confirm the
selected setting.
When the time has elapsed
The element switches off, the
‹‹
symbol
element switches to power level
sounds.
‹‹
and the Cook Timer indicator flash in the timer
display.
When the COOK TIMER touch key is touched, the
indicators go out and the acoustic signal ceases.
Notes
To set a cooking time of under 10 minutes, always
▯
touch 0 before you select the required value.
If a cooking time was set for several elements, the time
▯
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
▯
cooking time.
You can set a cooking time of up to
▯
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting procedure
Touch the KITCHEN TIMER touch key. The
1.
and the Kitchen Timer indicator light up in the timer
display.
Select the required time on the control panel and
2.
touch the KITCHEN TIMER touch key to confirm.
After a few seconds, the time begins to elapse.
y display flashes and the
‹‹ . An acoustic signal
ŠŠ
minutes.
‹‹
symbol