Movemode; Powerboost ® Function; Shortboost Function - Thermador Masterpiece Série Mode D'emploi

Masquer les pouces Voir aussi pour Masterpiece Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MoveMode™

You can use this function to transfer the heat settings
and the programmed cook time of one element to
another.
To transfer the settings, move the cookware from the
element which is switched on to another element.
Note: You can find additional information on the
positioning of the cookware in the section on
~ "Liberty™ cooking zone" on page 13
Activation
Move the cookware from the element which is
1.
switched on to another element.
The heat setting of the original element flashes. The
cookware is detected and the previously selected heat
setting and the
£
symbol flash in the new element
display.
Select the new element to confirm the settings.
2.
The heat setting of the original element is set to
1.
The settings have been transferred to the new element.
Notes
Move the cookware to an element which is not
switched on, which you have not yet preset or on
which no other cookware has been placed.
The PowerBoost
or ShortBoost function can only be
®
moved from left to right or right to left if no element is
active.
If a new item of cookware is set down on another
element before the settings have been confirmed, this
function is ready for both cooking vessels.
If several vessels are moved, the function is only ready
for the vessel which was moved last.
‹‹
2.
PowerBoost
®
The PowerBoost
®
quantities of water faster than when using heat setting
This function can be activated for an element at any time,
provided the other element in the same group is not in
use (see illustration).
Note: The PowerBoost
the Liberty
cooking zone if it is being used as a single
cooking zone.
Activating
Select an element.
1.
2.
Touch the POWER BOOST touch key.
The
indicator lights up.
The function is activated.
Deactivating
.
Select an element.
1.
2.
Touch the POWER BOOST touch key.
The
display goes out and the element switches back
to heat setting
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the cooktop.

ShortBoost function

The ShortBoost function enables you to heat cookware
faster than when using heat setting
After deactivating the function, select the appropriate
heat setting for your food.
This function can be activated for an element at any time,
provided the other element in the same group is not in
use (see illustration).
Note: The ShortBoost function can also be activated in
the Liberty™ cooking zone if it is being used as a single
cooking zone.
function
function enables you to heat up large
function can also be activated in
®
Š
.
Š
.
Š
.
®
19

Publicité

Table des Matières
loading

Table des Matières