Heatshift™ Function - Thermador Masterpiece Série Mode D'emploi

Masquer les pouces Voir aussi pour Masterpiece Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HeatShift™ function
This function activates the entire flexible cooking zone,
which is divided into three cooking areas and which has
preset power levels.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
Cooking areas
This means that an item of cookware can be moved
during the cooking process to another cooking area with
another power level:
Preset power levels:
Front area = power level
Middle area = power level
Rear area = power level
The preset power levels can be changed independently
of one another. You can find out how to change these in
the section on ~ "Basic settings"
Notes
If more than one item of cookware is detected on the
flexible cooking zone, the function is deactivated.
If the cookware is moved within the flexible cooking
zone or lifted up, the cooktop automatically starts
searching and the power level of the area in which the
cookware was detected is set.
You can find information on the size and positioning of
the cookware in the section on the function.
18
Š
.
Activation
1.
Select one of the two elements in the flexible cooking
zone.
Touch the HEAT SHIFT touch key. The indicator above
2.
the HEAT SHIFT touch key lights up. The flexible
cooking zone is activated as a single cooking zone.
The power level in the area in which the cookware is
located lights up in the cooking zone display.
The function has now been activated.
Changing the power level
The power levels for the individual cooking areas can be
changed during the cooking process. Set the cookware
down on the cooking area and change the power level
using the number keys.
Notes
Only the power level in the area in which the cookware
is located is changed.
If the function is deactivated, the power levels for the
three cooking areas are reset to the preset values.
Deactivating
Touch the HEAT SHIFT touch key. The indicator above
the HEAT SHIFT touch key goes out.
The function was deactivated.
Note: If one of the cooking areas is set to
deactivates after a few seconds.
, the function

Publicité

Table des Matières
loading

Table des Matières