Cook Time - Thermador MASTERPIECE CET304NS Mode D'emploi

Frying programs
Use the frying programs with a system pan only.
You can use the frying programs to prepare the following
dishes:
Program Dish
Ground meat
˜‚
Hamburger, Pork chop
˜ƒ
Steak medium rare
˜„
Steak medium or well done
˜...
Fish
˜†
Pancakes, French Toast
˜‡
Frozen oven French fries
˜ˆ
Stir-fried vegetables
˜‰
Omelette, eggs
˜Š
Select the desired program
The CookSmart™ function has to be activated.
Select the cooking zone on which the CookSmart™
1.
function is activated.
Touch Programs. The
2.
element display.
Select the desired frying program using the number
3.
keys.
The frying program is activated.
appears until the frying temperature is reached. A
˜ª
beep sounds. The temperature symbol
and the program number is displayed again.
Add the frying oil and then the food to the pan. Turn
4.
the food as usual to avoid burning.
Turning off the frying program
Select 0 from the number keys. the heating element will
turn off and the residual heat indicator will appear.
18
indicator lights up on the
˜‹
disappears
ª

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting the cook time
Select the desired element and power level.
1.
Touch the TIMER key. The indicator
2.
to the heating element display.
in the Timer display.
Within the next 10 seconds, set the desired time using
3.
the number keys. The timer begins to count down.
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear an audible signal. The indicators
and will flash in the element display. Touch TIMER to
0
turn off the indicators.
Change cook time
Select the element. Touch TIMER and set the new timer
value using the number keys 0-9 or
lights up next
0
and min lights up
‹‹
‹
and .
@ A