Basic Settings - Thermador MASTERPIECE CET304NS Mode D'emploi

Basic settings

The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display Function
™‚ Automatic child lock/panel lock
Off*
‹
On
‚
Sound signals
™ƒ
Confirmation signal and operating error signal off
‹
Only operating error signal on
‚
All signals on*
ƒ
Length of timer end signal
™‡
10 seconds*
‚
ƒ 30 seconds
1 minute
„
Turning on additional heating elements
™ˆ
Off
‹
On*.
‚
Last setting before turning off the heating element
ƒ
™Š Selection time for heating element
Unlimited*: You can adjust the settings of the last heating element used at any time without hav-
‹
ing to select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
™‹ Reset to basic settings
Off*
‹
‚ Reset the appliance to basic settings
*factory settings
Changing the basic settings
The cooktop must be turned off. The timer must not be
activated.
Turn on the cooktop with the main switch.
1.
Within the next 10 seconds, touch PANEL LOCK for
2.
4 seconds.
and will appear on the display.
™‚ ‹
Touch PANEL LOCK repeatedly until the desired value
3.
appears in the upper left corner of the display area.
20
Touch or repeatedly until the desired value
@ A
4.
appears in the upper right corner of the display area.
Touch PANEL LOCK again for 4 seconds. The setting
5.
is activated.