Wipe Protection; Automatic Time Limitation; Basic Settings - Thermador CET366TB Mode D'emploi

Masquer les pouces Voir aussi pour CET366TB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Automatic panel lock
With this function, the panel lock is automatically
activated whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.

Wipe Protection

Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the LOCK key. The
lights up. The control panel is locked for 35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.

Basic Settings

The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display
Function
Automatic child lock
™‚
Off*
On
Manual and automatic child lock Off
ƒ
Sound signals
™ƒ
Confirmation beep and error signal off
Only error signal on
Only confirmation beep on
ƒ
All signals on*
Automatic timer
™†
Off*
-
ŠŠ
Automatic shut-off time
Duration of timer end signal
™‡
10 seconds*
30 seconds
ƒ
1 minute
Turning on additional heating elements
™ˆ
Off
On*.
Last setting before turning off the heating element
ƒ
*factory settings
indicator above the key
Ú
To deactivate:
To deactivate the function before the time has elapsed,
touch the LOCK key. The
off, the function is deactivated.
Notes
An acoustic signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
The wipe protection lock does not lock the main
switch. The cooktop can be switched off at any time.

Automatic time limitation

If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
indicator
/
flash alternately in the display.
œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
indicator above the key turns
Ú
and the residual heat
"‰
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Masterpiece serieMasterpiece cet366tb

Table des Matières