Accessories; Reliant Scale Rls6; Removing The Hanger Bar - Invacare Reliant 450 RHL450-1 Manuel D'utilisation

11 ACCESSORIES

11 Accessories

11.1 Reliant Scale RLS6

The Reliant Scale is a compact precision scale system designed specifically for the Invacare Patient Lift System.
WARNING
DO NOT install or use this equipment without first reading and understanding these instructions. If you are unable to understand the
Warnings, Cautions or Instructions, contact a healthcare professional, dealer or technical personnel before attempting to install this
equipment - otherwise, injury or damage may occur.

Removing the Hanger Bar

 For this procedure, refer to FIGURE 11.1.
1. Remove the shoulder bolt, locknut, pinch guard and washer which secure the hanger bar to the boom mounting bracket.
 Save the shoulder bolt and locknut to secure the Reliant Scale to the boom. The pinch guard will not be used when the scale is installed. Save
the pinch guard for future use of the hanger bar without scale.
Removing the hanger bar hardware will release the hanger bar, two nylon washers and the hanger bar pin. Save the hanger bar pin and the
two nylon washers for future use of the hanger bar without the scale.
Manual/Electric Portable Patient Lift
50
Part No. 1078987