Replacing The Electric Actuator - Invacare Reliant 450 RHL450-1 Manuel D'utilisation

Replacing the Electric Actuator

1. Remove the nut, washer and shoulder bolt that secure the electric actuator to the mast mounting bracket.
2. Rest the boom on your shoulder and remove the nut, bolt, plastic bushing and pinch guard from the boom mounting bracket.
3. Remove the electric actuator assembly.
4. Reverse steps for installation.
CAUTION
DO NOT overtighten the nut and bolt. This damages the mounting bracket.
Mast
Bushing
FIGURE 10.2 Maintaining the Manual/Hydraulic Pump - Replacing a Manual/Hydraulic Pump -Replacing the Electric Actuator
Part No. 1078987
Manual/Hydraulic
Boom
Pinch Guard
Electric
Mast
Bushing
45
10 MAINTENANCE
Boom
Pinch
Guard
Manual/Electric Portable Patient Lift