Replacing The Hanger Bar - Invacare Reliant 450 RHL450-1 Manuel D'utilisation

10.6 Replacing the Hanger Bar

WARNING
After the first year of use, the hooks of the hanger bar and mounting brackets of the boom should be inspected every six months to
determine the extent of wear. If these parts become worn, replacement must be made.
1. The hanger bar comes attached to the boom with bolt, nut, washers, and pinch guard.
 Washers should be placed against both sides of the boom mounting bracket to eliminate damage.
The hanger bar has three hooks on both ends to attach the sling that supports the patient during lift.
2. Remove existing hardware and replace the hanger bar.
CAUTION
DO NOT overtighten the nut and bolt. This damages the mounting bracket.
Part No. 1078987
450 lbs Hanger Bar
47
10 MAINTENANCE
600 lbs Hanger Bar
Manual/Electric Portable Patient Lift