Self-Timer Recording - Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation

1
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
2
PHOTO
SHOT
1
CARD CARD
TAPE
MODE
2
PHOTO
SHOT
PHOTO
PHOTO PHOTO
2
STILL

Self-timer Recording

When you set the self-timer, the still pictures are automatically taken
after 10 seconds, on the Cassette and the Memory Card.
1
Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[SELF TIMER] >> [ON].
≥The [
2
Press the [PHOTO SHOT] Button.
≥The Recording Lamp and the [
Photoshot is activated after 10 seconds.
≥You can also use the RapidFire
≥For other notes, see page 85.
~~~~~~~~~~~~~~~~~~~~~~
PhotoShot Recording on the DV Cassette
With this function, you can record still pictures with sound for
approximately 7 seconds each on the Cassette.
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[TAPE].
2
Press the [PHOTO SHOT] Button in the Recording
Pause Mode.
≥The Palmcorder records a still picture for about 7 seconds and
then switches back to the Recording Pause Mode.
≥PhotoShot Recording results in slightly inferior image quality.
≥If you set [SHTR EFFECT] on the [OTHER FUNCTIONS1]
Sub-Menu to [ON], you can add an image and a sound like
releasing the shutter.
ª Progressive PhotoShot
With the Progressive PhotoShot
pictures with higher resolution than with the normal PhotoShot
Function.
≥After setting [PROGRESSIVE] on the [CAMERA SETUP]
Sub-menu to [ON] or [AUTO], press the [PHOTO SHOT] Button in
the Recording Pause Mode. [æ] is displayed.
≥This Function may not work with some function settings. (l 85)
≥If you select Card Mode, [PROGRESSIVE] is set to [ON].
PHOTO
ª Continuous PhotoShot
If the [PHOTO SHOT] Button is held down with the [SHTR EFFECT]
of the Sub-Menu [OTHER FUNCTIONS1] set to [ON], the
Palmcorder will record still images without interruptions every
1
0.7 seconds until the button is released.
≥The screen blinks and, at the same time, a shutter clicking sound is
recorded. (This function, however, is not enabled when
Progressive PhotoShot is set to [ON] or [AUTO].)
ª Digital Still Picture
When the [STILL] Button
pictures. When the Button is pressed again, the Digital Still Picture
Mode is cancelled.
≥We recommend that you press the [STILL] Button first at the
position where you want to record the picture and then press the
[PHOTO SHOT] Button.
≥For other notes, see page 85.
] Indication appears.
TM
TM
TM
2
is pressed, images become still
30
] Indication flash and the
Consecutive Still Shots.
Mode
Mode, you can record still
1