Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 52

3, 4
PHOTO
SHOT
3
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
1
F 7
640
2
3
Recording on the Memory Card
3 kinds of data can be recorded by selecting with the [TAPE/CARD/
CARD MODE] Selector. When recording a still picture, slide the
1, 2
[TAPE/CARD/CARD MODE] Selector until the [PICTURE] Indication
1, 2
1
appears (Card PhotoShot), when recording a moving picture,
slide the [TAPE/CARD/CARD MODE] Selector until the [MPEG4]
CARD
CARD
TAPE
MODE
Indication
slide the [TAPE/CARD/CARD MODE] Selector until the [VOICE]
Indication
ª Card PhotoShot
Still pictures can be recorded on the Memory Card from the
Palmcorder lens as well as from scenes that have already been
recorded on a cassette.
Recording from the Palmcorder Lens (CAMERA Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD].
PICTURE
4
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication
appears.
≥Remaining Number of Card PhotoShot pictures
3
Press the [PHOTO SHOT] Button.
≥The [
MPEG4
Recording from a Cassette (VCR Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
VOICE
[CARD MODE] until the [PICTURE] Indication
appears.
3
Set [VCR FUNCTIONS] >> [CARD SETUP] >>
[PICTURE QUALITY] >> a desired picture quality.
4
Start playback and press the [PHOTO SHOT] Button
at the scene you want to record.
≥While the image is being recorded, it stays still for a few
seconds.
2
appears (MPEG4 Recording), when recording voice,
3
appears (Voice Recording).
] Indication will light in red.
PICTURE
52
4
.