Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 19

Before Use
1
2
1
1
2
1 2
2
3
3
4
1
Lens Cap and Easy-Grip Strap
ª Attach the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass one end of the Lens Cap Cord through the
attached eye on the Lens Cap. Then pass the other
end through the loop made by itself and pull tight.
2
Pass the end of the Lens Cap Cord through the hole
in the Easy-Grip Strap Attachment part and the Lens
Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the Easy-Grip Strap
1
. (When you are not recording, be sure to keep the Lens Cap
attached to the Lens for protection.)
ª Adjust the Easy-Grip Strap
Adjust the length of the Easy-Grip Strap to the size of your hand.
1
Detach the tip of the Easy-Grip Strap and adjust the
length of it.
2
Reattach the tip of the Easy-Grip Strap.
ª To Use as a Free Style Easy-Grip Strap
Using the Easy-Grip Strap as the Free Style Easy-Grip Strap makes
1
it easier to handle and carry the Palmcorder.
when used in conbination with the MagicWire Remote Control with
Narration Mic.
1
Open the Lock Cover
sides.
2
Keep pressing on the Lock Button
≥Hold the Palmcorder securely.
≥Close the Lock Cover
3
Slide the pad of the Easy-Grip Strap.
4
4
Attach the Easy-Grip Strap around your wrist.
When re-attaching the Grip Belt Attachment to the Palmcorder
1
Push until it locks with a click.
≥To prevent from getting unlocked accidentally, press on
mount securely.
5
2
by holding tabs
2
after pulling off.
19
1
It is also convenient
3
on both
4
and pull it off.
5
and