Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 24

24)
DISPLAY SETUP
25) DATE/TIME OFF D/T DATE
C.DISPLAY COUNTER MEMORY
26)
TIMECODE
C.RESET ---- YES
27)
DISPLAY ALL PARTIAL OFF
LCD MODE NORMAL
28)
LCD/EVF SET ----
29)
RETURN
PUSH MENU TO EXIT
30)
OTHER FUNCTIONS1
31)
REMOTE VCR1 VCR2 OFF
32)
REC LAMP OFF
BEEP SOUND OFF
33)
SHTR EFFECT OFF
CLOCK SET ---- YES
34)
SELF REC NORMAL MIRROR
35)
VOICE POWER SAVE
36)
RETURN
PUSH MENU TO EXIT
OTHER FUNCTIONS2
37)
DEMO MODE OFF
INITIAL SET ---- YES
38)
RETURN
PUSH MENU TO EXIT
[DISPLAY SETUP] Sub-Menu
24) Date and Time Indication [DATE/TIME] (l 83)
25) Counter Display Mode [C.DISPLAY] (l 83)
26) Counter Reset [C.RESET] (l 96)
≥Set the counter value to zero. However, it cannot reset the
BRIGHT
YES
Time Code.
---- YES
27) Display Mode [DISPLAY] (l 83)
28) LCD Brightness [LCD MODE] (l 21)
29) LCD and Viewfinder Adjustment [LCD/EVF SET] (l 21)
[OTHER FUNCTIONS1] Sub-Menu
30) Remote Controller Mode [REMOTE] (l 17)
ON
31) Recording Lamp [REC LAMP] (l 28)
ON
ON
32) Beep Sound [BEEP SOUND] (l 84)
OFF ON
33) Shutter Effect [SHTR EFFECT] (l 30)
---- YES
34) Date and Time Setting [CLOCK SET] (l 27)
35) Self-Recording [SELF REC] (l 29)
36) Voice Power Save [VOICE POWER SAVE] (l 90)
[OTHER FUNCTIONS2] Sub-Menu
37) Demonstration Mode [DEMO MODE]
ON
≥If no operation takes place for approximately 10 minutes after
the AC Adaptor was connected to the Palmcorder and the
[OFF/ON/MODE] Switch was turned to [ON] without inserting a
---- YES
Cassette, the Palmcorder is automatically set to
Demonstration Mode for introducing its functions. If any button
is pressed or operated, the Demonstration Mode is cancelled.
The Demonstration Mode can be started by setting
[DEMO MODE] to [ON] and by exiting the Menu. To terminate
the Demonstration Mode, insert a Cassette or set the
[DEMO MODE] to [OFF].
38) Initial Setting Mode [INITIAL SET] (l 83)
24