Using The Menu Screen - Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation

2, 3, 4, 5
1, 2
1
W.B / SHUTTER / IRIS
MF / VOL / JOG
2
CAMERA
3
VCR
CARD 1
4
PB
2
CAMERA FUNCTIONS
1.CAMERA SETUP
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS1
8.OTHER FUNCTIONS2
PUSH MENU TO EXIT
3
VCR FUNCTIONS
1.PLAYBACK FUNCTIONS
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.AV IN/OUT SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
PUSH MENU TO EXIT
4
CARD FUNCTIONS
1.DELETE CARD FILE
2.CARD EDITING
3.DISPLAY SETUP
4.OTHER FUNCTIONS
PUSH MENU TO EXIT
START/
DATE/ PHOTO
STOP
OSD SHOT
TIME
COUNTER RESET TITLE ZOOM
T
MULTI/
¥ REC A.DUB
P-IN-P
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
PICTURE
No.25 100-0012

Using the Menu Screen

To facilitate the selection of a desired function or setting, this
Palmcorder displays various function settings on menus.
1
Press the [MENU] Button.
PUSH
≥The Menu corresponding to the Mode selected by using the
[OFF/ON/MODE] Switch
≥When the [CAMERA] Lamp is on, the Camera Function Menu
is displayed.
≥When the [VCR] Lamp is on, the VCR Function Menu is
displayed.
≥When the [CARD PB] Lamp is on, the Card Function Menu is
displayed.
2
Rotate the [PUSH] Dial to select a desired Sub-Menu.
3
Press the [PUSH] Dial to display the selected
Sub-Menu.
4
Rotate the [PUSH] Dial to select the item to be set.
5
Press the [PUSH] Dial to set the selected item to a
desired Mode.
≥With each press of the [PUSH] Dial, the cursor [1] brings up a
subsequent Mode. Menu items that cannot be used in
combination with the selected menu items are displayed in
dark blue.
≥While a Menu is displayed, you cannot begin to record or play
back. Menus can be displayed during playback but not during
recording.
≥The above operations can be carried out using the Remote
Controller. (l 15)
≥To display the Menu, press the [MENU] Button
Remote Controller.
≥To select items on the Menu, press the [ITEM] Button
on the Remote Controller.
≥To set the mode for the selected items, press the [SET]
Button
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the
Palmcorder is turned off. (But, the setup of [EFFECT2] (l 39) will
not be retained.) If, however, the Battery or AC Adaptor is
disconnected before turning the Palmcorder off, the selected setting
5
may not be retained.
≥Menu operation flow is shown in this text by >>.
7
ª File Selection in the Card Playback Mode
6
A File Selection Operation may be necessary during Menu
Operations. In this case, carry out the following procedure.
1
Turn the [PUSH] Dial and select a file.
≥The selected file is marked by a frame
2
Press the [PUSH] Dial to confirm the selection of the
8
file.
≥After the above File Selection Procedure, carry out the various
Menu Operations. (The above procedure will not be repeated in
the following instructions.)
1
2
3
4
7
on the Remote Controller.
22
is displayed.
8
.
5
on the
6
(l 58)