Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation page 102

If you are experiencing one of the following problems with your Digital Palmcorder, it may be something
you can correct yourself. Check the list below for Problems and Solutions.
The original sound was erased when audio
dubbing was performed.
Sounds cannot be played back.
The recorded picture on the Memory Card is
not clear.
Card PhotoShot playback pictures do not look
normal.
Even if a Card is formatted, it cannot be used.
Problems
If you perform audio dubbing on a recording
done in [16bit] Mode, the original sound will be
erased. If you want to preserve the original
sound, be sure to select [12bit] Mode at the time
of recording.
≥Although a Cassette with no audio dubbing is
being played, is [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]?
To play back a Cassette with no audio
dubbing, [12bit AUDIO] must be set to [ST1].
≥Is the Variable Speed Search Function
working? Press the [1] Button to cancel the
Variable Speed Search Function.
Do you have [PICTURE QUALITY] on the
[CARD SETUP] Sub-Menu set to [NORMAL] or
[ECONOMY]? If recording is made when it is set
to [NORMAL] or [ECONOMY], a detailed image
may show a mosaic pattern. Set the
[PICTURE QUALITY] to [FINE]. (l 53)
There is a possibility that the images are
damaged. To prevent the loss of image data, we
recommend that you back images up on a
Cassette or personal computer. (l 59, 70)
There is a possibility of damage to either the
Palmcorder or the Card. Please contact
Panasonic Call Centre.
102
Solutions