Slide Show - Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation

1, 2, 3, 4, 5, 6, 7
1, 2, 3
W.B / SHUTTER / IRIS
PUSH
MF / VOL / JOG
8
BACK
LIGHT
EDIT
3
PUSH MENU TO RETURN
4
M.SLIDE
5
SLIDE
6
SLIDE

Slide Show

The recorded still pictures in the Card can be played back like a
Slide Show. You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Slide Show
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
2
Set [EDIT] >> [YES].
3
Rotate the [PUSH] Dial to select playback order and
then press the dial.
4
Rotate the [PUSH] Dial to adjust the playback time
and then press the dial.
≥This step is skipped when there are no pictures set for the
Slide Show.
5
Rotate the [PUSH] Dial to select playback order and
then press the dial.
≥The Playback Order indication
(Second) indication
≥The [¥] indication
been selected for the Slide Show. (l 82)
≥To select the next picture, repeat Steps 3 to 5 above.
6
Press the [MENU] Button to end the setup.
7
After setting [SLIDE SHOW] >> [PRESET], press the
[MENU] Button.
8
Press the [1] Button.
≥The [M.SLIDE!] Indication is displayed.
To Play Back All the Pictures Continuously
1
After setting the [SLIDE SHOW] to [ALL], press the [1] Button.
No.5 No.5
9SEC 9SEC
2
≥The [SLIDE!] Indication is displayed.
≥All pictures are played back for approximately 5 seconds each,
from the first to the last recorded picture, and playback then stops.
To Pause the Slide Show
Press the [;] Button.
≥The [(M.) SLIDE;] Indication is displayed.
To Stop the Slide Show
Press the [∫] Button.
To Verify the Selected Pictures
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW]
>> [YES] >> [VERIFY] >> [YES].
≥Only the selected pictures are displayed in Multi-Picture Mode in
the Playback order.
To Delete the Selected Pictures
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
2
Set [DELETE] >> [YES].
3
Select the picture you want to delete and press the
[PUSH] Dial.
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW]
>> [YES] >> [RESET] >> [YES] >> [YES].
≥Slide Show settings are reset.
≥For other notes, see page 91.
2
appear.
3
is displayed below pictures that have
60
1
and the Playback Time
4
5
6