Camera Mode - Panasonic Palmcorder MultiCam PV-GS50 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2
5
CARD
CARD
TAPE
MODE
AUTO
MANUAL
FOCUS
3,
1
4
1
CAMERA
VCR
CARD
PB
3
6
7
SEARCH
SEARCH
2
REC
RECORD
4
PAUSE
PAUSE

CAMERA Mode

Recording
1
Set the [OFF/ON/MODE] Switch to [ON].
≥The [CAMERA] Lamp lights up.
2
Slide the [TAPE/CARD/CARD MODE] Selector
towards [TAPE].
3
Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] indicator is displayed, it changes to
2
[REC].
≥The Rec Lamp (LED Lamp)
alerts those being recorded that recording is in progress. The
Rec Lamp does not light up if the [REC LAMP] on the
[OTHER FUNCTIONS1] Sub-menu is set to [OFF].
4
Press the Recording Start/Stop Button again to
pause the recording.
≥[PAUSE] is displayed.
≥If the Recording Pause Mode continues for more than
5 minutes, the power is turned off automatically for tape
protection and power conservation. To resume recording from
this condition, turn on the power again.
≥When recording while the Mode Selector Switch is set to [AUTO]
5
, the Palmcorder automatically adjusts the focus and white
balance. (In some cases, they cannot be adjusted automatically
and need to be adjusted manually.) (l 37)
≥Before turning on the power, remove the Lens Cap. If the Lens
Cap is still attached when the power is turned on, Automatic
White Balance Adjustment may not function correctly. (l 37)
ª To Check the Recording
By pressing the [S] Button
can play back the last few seconds of the recorded scene.
≥[CHK] is displayed. After checking, the Palmcorder resumes the
Recording Pause Mode.
≥For other notes, see page 84.
ª To View the recorded scene while the Recording
is paused
(Camera Search)
The recorded scene can be viewed by holding down the
6
[SEARCHj] Button
Pause Mode.
The Camera Search Function is useful for finding the starting point
of a new scene to create a smooth transition from one scene to
another.
≥When the [SEARCHj] Button is pressed, images are played back
in the reverse direction.
≥When the [SEARCHi] Button is pressed, images are played back
in the forward direction.
≥For other notes, see page 85.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch to [OFF].
28
1
3
lights up during recording and
4
6
in the Recording Pause Mode, you
or [SEARCHi] Button
7
in the Recording

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Palmcorder multicam pv-gs50-k

Table des Matières