Quickstart; Definition Of Term / Abbreviation; Symbols - Burkert TopControl Basic Guide Rapide

1

QUICKSTART

The Quickstart describe the entire life cycle of the device. Keep the
Quickstart in a location which is easily accessible to every user and
make the Quickstart available to every new owner of the device.
Important Safety Information.
Read Quickstart carefully and thoroughly. Study in particular the
chapters entitled "Basic safety instructions" and "Authorized use".
▶ Quickstart must be read and understood.
Quickstart explains, for example, how to install and start-up the
device.
A detailed description of the device can be found in the operating
instructions for positioner Type 8694.
The operating instructions can be found on the enclosed CD
and on the Internet at:
www.burkert.com
1.1

Definition of term / abbreviation

The term "device" used in these instructions always stands for the
positioner Type 8694.
In these instructions, the abbreviation "Ex" always refers to "poten-
tially explosive".
4
english
Type 8694
Quickstart
1.2

Symbols

The following symbols are used in these instructions.
DANGER!
Warns of an immediate danger.
▶ Failure to observe the warning may result in a fatal or serious injury.
WARNING!
Warns of a potentially dangerous situation.
▶ Failure to observe the warning may result in serious injuries or
death.
CAUTION!
Warns of a possible danger.
▶ Failure to observe this warning may result in a medium or minor
injury.
NOTE!
Warns of damage to property.
indicates important additional information, tips and
recommendations.
refers to information in these operating instructions or in
other documentation.
▶ Designates an instruction to prevent risks.
→
designates a procedure that must be carried out.