Functions Of The Keys - Burkert TopControl Basic Guide Rapide

10.3.2 Functions of the keys

The configuration of the 2 keys on the board varies depending on the
operating status (AUTOMATIC / MANUAL).
ON DIP
1 2 3 4
Fig. 22: Keys
Type 8694
Start-up
Communications
interface
LED 1
LED 2
DIP switches
Key 2
Key 1
MANUAL operating status (DIP switch 4 set to ON):
Key Function
8)
1 Aerate (manually open / close the actuator)
2 Deaerate (manually open / close the actuator)
Tab. 12: Configuration of the keys for MANUAL operating status
AUTOMATIC operating status (DIP switch 4 set to OFF):
Key Function
1 Press for 5 s to start the X.TUNE function
2 -
Tab. 13: Configuration of the keys for AUTOMATIC operating status
No function if the digital input was activated with the "Manual/Auto
8)
change-over" via the communications software.
Depending on the operating principle of the actuator.
9)
english
9)
9)
25