Control And Display Elements - Burkert TopControl Basic Guide Rapide

NOTE!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶ When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the connection housing.
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the trans-
parent cap in all the way.
→
Close the device (assembly tool: 674077
Important:
When the Teach function is activated the actuator cannot
be actuated via the AS Interface.
The assembly tool (674077) is available from your Bürkert sales office.
6)
Type 8694
Start-up
).
6)

10.3 Control and display elements

A detailed description of the operation and functions of the
positioner and the communication software can be found in
the respective operating instructions.
NOTE!
Breakage of the pneumatic connection pieces due to rota-
tional impact.
▶ When unscrewing and screwing in the transparent cap, do not
hold the actuator of the process valve but the connection housing.
Fig. 20: Open positioner
→
Screw off the transparent cap of the positioner to operate the
keys and DIP switches.
english
Transparent cap
Body casing
Connection housing
Actuator
23