Changing The Playback Area; Switching To Es-Link Mode; Searching Backward/Forward - Esoteric Grandioso P1X Mode D'emploi

Playback (continued)

Changing the playback area

Press for at least
2 seconds
Some Super Audio CDs have multiple areas, including stereo (2-channel)
and multichannel . Hybrid Super Audio CDs have two layers with one
containing ordinary CD-quality audio .
When stopped, press the stop (8) button for at least two seconds to
change the playback area .
o To change the playback area using the remote control, press the
PLAY AREA button when the unit is stopped .
o The Grandioso P1X does not support the playback of multichannel
areas on Super Audio CDs .

Switching to ES-LINK mode

To playback an MQA-CD with MQA decoding when connected to
a Grandioso D1X, the ES-LINK setting must be set to stereo mode
(ESLINK>ST) (page 26) .
When stopped, press the pause (9) button for at least two seconds
to change the ES-LINK setting .
20

Searching backward/forward

Press for at least
1 second
During playback or when paused, press and hold a skip (.//)
button (for at least one second) until searching backward/forward
starts .
Continuing to press and hold will accelerate the backward/forward
search speed .
Low speed Medium speed
Release the button to resume playback or return to a paused state .
High speed