Pausing playback
Press the PAUSE button (J) to pause playback and the
indicator ring of the PLAY button (y) blinks.
Press the PLAY button (G) or the PAUSE button (J) to restart
playback.
Stopping playback
During playback, press the STOP button (H) to stop playback.
Opening and closing the tray
Pressing the OPEN/CLOSE button (L) opens the tray if it is
closed, and closes it if it is open.
< When the OPEN/CLOSE button (L ) is pressed during
playback, it may take a few seconds before the disc is
"unloaded" and the tray opens.
Selecting the playback area
There are two types of Super Audio CDs, regular ones that
contain 2-channel stereo and multi-channel stereo and hybrid
discs (two-layer discs) that contain Super Audio CD and
regular CD data.
To change the playback area, press the front panel MODE
button for 2 seconds or more while playback is stopped.
< Press the PLAY AREA button in stop mode to select a
playback area if you use the remote control.
Fast scanning
When playing back, use the SCAN button (m or ,) to
move backwards and forwards. Press the PLAY button (G) to
restart playback at normal speed at the desired location.
Pressing the SCAN button (m or ,) repeatedly changes
the scanning speeds. There are three speeds. The blinking
speed of "<" or ">" on the display shows the current
scanning speed.
Fast q Faster q Fastest q Playback at normal speed
< You can also use the SKIP button (. or /) of the main
unit. To start scanning (or to change the scanning speed),
press and hold the SKIP button for more than one second.
13