Selecting The Playback Area (Sacd); Direct Playback; Skipping Playback - Esoteric K-01 Mode D'emploi

Searching for a part of a track
During playback press the SCAN (
remote control unit to scan backwards and forwards. Press the
PLAY ( ) button to restart playback at normal speed at the desired
location.
When using the front panel controls of the player, press and hold
the Skip ( / ) buttons repeatedly.
Each time the SCAN ( /
scanning speed changes as follows:
1 2 3
Slow Fast
The blinking speed of "<" or ">" on the display shows the current
scanning speed.

Skipping playback

Press the Skip ( /
track is found.
The selected track will be played from the beginning.
If the button is pressed once during playback, the track being
played will be played again from the beginning. To return to the
beginning of the previous track, press the
However, If it is pressed within one second from the start of the
track, playback returns to the start of the previous track.
If tracks are skipped when playback is paused or stopped, playback
is paused at the start of the selected track. Press the PLAY (
button to start playback of the selected track.
/ ) buttons on the
) buttons are briefly pressed, the
Normal playback
) buttons repeatedly until the desired
button repeatedly.

Selecting the playback area (SACD)

Other than regular Super Audio CDs that contain 2-channel stereo,
there are some types of Super Audio CDs that have multi-channel
stereo, such as hybrid discs (two-layer discs) that contain Super Audio
CD and regular CD (PCM), data.
If you have a disc with selectable playback layers, and if you want to
change the playback option, follow these directions.
Press the STOP button on the front panel for more than
2 seconds to change the playback area of a Super Audio CD when
playback is stopped.
As an example, this option allows you to select the CD/PCM layer,
or SACD (DSD), layer of a hybrid Super Audio CD.
Pressing the PLAY AREA button on the remote control unit can also
change the playback area.

Direct playback

When stopped or during playback, press the Number buttons
to directly select a track.
Playback starts from the selected track.
Examples:
To playback track 5
To playback track 23
)
To playback track 30
If you accidentally press the "+10" button, press the CLEAR button
to cancel the input value.
Hold down
more than 2 sec.
15