Adding Tracks To The End Of The Program; Clearing The Entire Program And Resuming Ordinary Playback; Changing The Playback Area - Esoteric P-05X Mode D'emploi

Adding tracks to the end of the program

When stopped or during playback, use the number buttons to select
the track you want to add.
Clearing the entire program and resuming
ordinary playback
When stopped or during playback, press the REPEAT button for at
least two seconds to end program mode. Press the REPEAT button
during program playback for at least two seconds to resume ordinary
playback from that point.
o The contents of the program will be cleared.
In addition, when stopped or during playback, if you press the tray
open/close (-) or main unit POWER button, the program contents
will also be cleared.

Changing the playback area

Press for at least
2 seconds.
Some Super Audio CDs have multiple areas, including stereo (2-chan-
nel) and multichannel. Hybrid Super Audio CDs have two layers with
one containing ordinary CD-quality audio.
When stopped, press the stop (8) button for at least two seconds to
change the playback area.
o To change the playback area using the remote control, press the
PLAY AREA button when the unit is stopped.
o When an SACD multichannel area is selected, multichannel audio
will be downmixed to stereo and played back.
21