Function And Operation; General; Operation Principle - Assa Abloy KESO Integra Instructions D'utilisation

Tab. 1 :
Configuration of
KESO Integra
depending
on the mode
Type of application Description
Stand-alone
Offline (NOK)
Online
EN
34

Function and operation

General

The door to be locked must be equipped with a mechanical DIN mortise lock.
When unlocked, the door is opened using a door handle with split handle pin. The
angle of rotation of the door handle is 35°.

Operation principle

KESO Integra is suitable for escape doors because the inner door knob is continu-
ously engaged and the door can always be opened from the inside.
The outer door handle is engaged after successful log-in with the KESO Integra.
k-entry ® management software
k-entry ® is management software for mechanical, mechatronic and electronic
locking systems (k-entry
managed in the k-entry
Then KESO Integra is configured in different ways depending on the type of use
(Tab. 1).
In stand-alone mode, KESO Integra is configured via the micro USB interface with
the PPG V3 programming device.
In offline (Network On Key) mode, a KESO Integra is configured via the micro USB
interface with the PPG V3 programming device. The authorised ID media are
uploaded to an update terminal in the k-entry
and authorisations are communicated to an ID medium at this update terminal
and uploaded to the fitting. Settings must be made in the k-entry
The ID media transmit the data to additional fittings that are operated in offline
mode.
KESO Integra cannot be used in Online mode.
(For this mode, ASSA ABLOY offers E100 online door fittings:
www.assaabloy.ch)
In online mode, the data is transmitted via a wireless HUB to the fittings.
® operating manual). Users and ID media are created and
® software. Additional settings can be made as necessary.
® software. The latest information
®
Function and operation
software.