Saving, Retrieving And Deleting Results; Cleaning And Storing The Instrument - Beurer Bm 19 Mode D'emploi

of stimulants, stress or lack of sleep. Arrhythmia can only be
ascertained through examination by your doctor.
Repeat the measurement if the flashing icon
after the measurement. Please note that you should rest for
5 minutes between measurements and not talk or move dur-
ing the measurement. If the icon
contact your doctor. Any self-diagnosis and treatment based
Range of blood pressure values Systolic (in mmHg) Diastolic (in mmHg) Measure
Grade 3: Severe hypertension
Grade 2: Moderate hypertension 160 – 179
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two dif-
ferent WHO ranges (e.g. systolic in the high-normal range and
diastolic pressure in the normal range) the graphic WHO clas-
sification on the unit indicates the higher range (high-normal in
the example described).

6. Saving, retrieving and deleting results

The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are lost.
In order to retrieve measurement results again, press the mem-
ory key (M). First the average value of all saved measurements
is displayed
appears often, please
> = 180 > = 110
100 – 109
140 – 159 90 – 99
130 – 139 85 – 89
120 – 129 80 – 84
< 120 < 80
on the test results may be dangerous. It is vital to follow your
doctor's instructions.
WHO classification:
According to WHO Guidelines/Definitions and the latest findings,
the test results can be classified and evaluated according to the
following chart:
Seek medical advice
Seek medical advice
Have it checked regularly by doctor yellow
Have it checked regularly by doctor green
Check it yourself
Check it yourself
of this user memory is displayed (Display "A"). "). If you continue
pressing the memory button 'M', what are in each case the last
results measured are displayed and audibly announced with
graphic WHO classification. You can adjust the volume during
the announcement by pressing the volume key + and -.
You can clear the memory by pressing and holding + and -
simultaneously for 5 seconds after pressing the memory key
(M) and selecting the user.
If you wish to change the user memory, see "Select memory".

7. Cleaning and storing the instrument

Clean your device and cuff carefully only with a slightly mois-
tened cloth.
Do not use detergents or solvents.
16
LED is lightning
red
orange
green
green