Controller Operating And Control Elements - Burkert SE35 Notice D'utilisation

4 OPERATION
The operation is classified according to three levels.
A) Display
This menu allows the user to control the dosing by the keypad (start, pause, reset, stop);
using the LCD display, he can monitor the flow rate and the initial preset volume throughout
the dosing operation. The readings of the main counter and the daily counter are displayed
within this menu. The daily counter can be set to zero.
B) Parameter Definition
This menu enables the setting of dosing parameters (languages, measurement units,
equipment, K factor, dosing option, overfill correction, alarm and relay thresholds).
Simultaneous resetting of the two counters is carried out within this menu.
C) Testing
This menu enables the user to check the binary inputs (remote control) and to simulate the
operation of the relays.
It also caters for measuring the rotation frequency of the paddle wheel.

4.1 Controller Operating and Control Elements

Choice of digit value
Steps from 0 to 9
Menu selection
Direction
downwards in
menu or
sideways for digit
selection
8035
BATCH CONTROLLER SE35
E-11-
A
ccept of
choosen
parameter or
adjusted value
Relay 2 (contact closed)
Relay 1(contact closed)