Totalizer; Test Menu; Ext.act - Burkert SE35 Notice D'utilisation

4 CONFIGURATION

4.4.8 Totalizer

Simultaneous setting of both counters to zero. This facility becomes operational when the
user presses the ENTER key while in the «END» option within the Calibration menu.
ENTER
TOTAL
ENTER
END

4.5 Test Menu:

The following adjustments and checks are carried out in the Test Menu:

EXT.ACT.

RELAY 1
RELAY 2
FREQUENC
4.5.1 EXT.ACT.
This sub-menu provides for checking the allocation of binary logic levels to the binary data
inputs under the «EXT.MEM» dosing option and also provides a readout of the pulse duration
under option «EXT [T]».
«EXT.MEM» Option
ENTER
EXT.ACT.
ENTER
RELAY 1
8035
RES NO
RES YES
ENTER
0......9
Verification of the binary data inputs in mode «EXT.MEM».
Readout of Pulse duration in «EXT.[T] mode.
Check on relay 1 operation.
Check on relay 2 operation.
Transducer frequency readout
Return to the Main Menu and the setting of new parameters.
END
V 1
Readout of quantities corresponding to the coding of the binary
inputs (by using the rotary knob, for example). If the readout
shows «--» the coding of the inputs corresponds to a zero volume.
BATCH CONTROLLER SE35
simultaneously for 5 s.
V 4
E-25-