Table des Matières

Publicité

7.

RELAUNCHING YOUR KITE

SHIFT SYSTEM USE
HOW THE SHIFT SYSTEM HELPS TO RELAUNCH THE KITE:
When you crash the kite and you have NOT let go of the bar, it is very simple to relaunch the kite with the Shift system.
Pics 1 & 2
Wait until the kite is downwind. Make sure all lines are tensioned. Reach above the bar, grab the Shift line and pull it to-
ward yourself. This should force the leading edge of the kite to come toward you. As the kite rolls over onto its canopy,
keep your eyes on the kite. Never wrap the lines around your hand. When you let go of the slack line, pay special atten-
tion to stay clear of all lines.
Pics 3 & 4
To get the kite to begin moving toward the edge of the window, you will need to put some pressure on the steering lines.
Use extreme caution and keep clear of the Shift line. Apply tension on the appropriate steering line as the kite moves
closer to the edge of the window for relaunch. When the kite lifts out of the water, check all lines and make sure there
are no tangles. If the kite rolls over let it drift down wind and begin the process over again.
Tip:
When your kite has relaunched, if you have to body drag to get to your board, adjust the trim strap to depower the
kite. This will make it easier to work your way upwind. It might make steering looser, but the advantages of a shorter
body drag are well worth it.
1
3
18
naishkites.com
2
4

Publicité

Table des Matières
loading

Table des Matières