Relaunching Your Kite - Naish Kite 2011 Guide De L'utilisateur

7.

Relaunching Your Kite

Shift System Use
How the Shift System helps to relaunch the kite:
When you crash the kite and you have NOT let go of the bar, it is very simple to relaunch the kite with the Shift
system.
Pics 1 & 2
Wait until the kite is downwind. Make sure all lines are tensioned. Reach above the bar, grab the Shift line and pull
it toward yourself. This should force the leading edge of the kite to come toward you. As the kite rolls over onto its
canopy, keep your eyes on the kite. Never wrap the lines around your hand. When you let go of the slack line, pay
special attention to stay clear of all lines.
Pics 3 & 4
To get the kite to begin moving toward the edge of the window, you will need to put some pressure on the steering
lines. Use extreme caution and keep clear of the Shift line. Apply tension on the appropriate steering line as the kite
moves closer to the edge of the window for relaunch. When the kite lifts out of the water, check all lines and make
sure there are no tangles. If the kite rolls over let it drift down wind and begin the process over again.
Tip: When your kite has relaunched, if you have to body drag to get to your board, adjust the trim strap to depower
the kite. This will make it easier to work your way upwind. It might make steering looser, but the advantages of a
shorter body drag are well worth it.
1
3
18
naishkites.com
2
4
7. Relaunching Your Kite
Relaunch
How the Universal Control System helps to relaunch the kite:
If the kite is straight downwind of you, with the leading edge on the water, you can simply pull on one of the back
leader lines to relaunch the kite. As you pull the leader line in, the kite will roll on its side and work its way to the
edge of the window. From there it will relaunch easily. Make sure that you never wrap the line around your hand. Be
careful not to become entangled in any slack line.
1
3
2
4
naishkites.com
19