Publicité
Les langues disponibles
Les langues disponibles
The spreader part 123 can be found on board
13.
Mark the distance of the shrouds.
Make the cuts.
After painting, fasten the spreader onto the
shrouds.
11.7 Anchor winch
187
188 189
182
190
184
191
Updated June 2016
186
182
185
229
183
Page 27
Place the axle tube 189 over the hubs of the
gear wheels 187 and 188. Drill out the holes in
the gear wheels to 2 mm.
Stick the spacers 184 into the recess on part
182.
Slide the axles 229 through the gear wheels
and the side parts of the winches. Now mount
the threaded rods 190 with the nuts 191 in the
rear boreholes. Set the winch body on the
base plate and stick it together.
©
Krick Modelltechnik Knittlingen
Publicité
