Krick ANTARES Mode D'emploi page 65

Surround all edges to the deck and the roof of
the skylight with Sapelly strips.
After painting, insert the window panes from
the rear and insert the brass nails 204 into the
holes of the window frame.
The penultimate step is to attach the window
guard. To do so, stick together parts 96 in
pairs.
Updated June 2016
Now cut the brass rods to length and stick the
whole thing on after painting.
Follow the same steps to decorate the front
companionway and the wheelhouse with the
mahogany veneer.
Parts 98 to 105 and GF 118 are required for
the front companionway.
Page 17 ©
Krick Modelltechnik Knittlingen