Publicité
Les langues disponibles
Les langues disponibles
For the wheelhouse, you need parts 75 to 77.
Parts 79 to 81 are stuck together for the super-
structure.
Also cover the insides of the cockpit with parts
113 and 114.
Now attach the benches of the cockpit.
Updated June 2016
First, stick together parts 51 and 111. Make
sure that you use a left and a right part.
125
124
For help, stick together the template and the
stamp from parts 124 and 125. Stick adhesive
tape over the areas that come into contact with
the veneer so that the adhesive cannot bond to
it.
Next, build the backrests of the benches. To do
so, soften 2 parts 112 one after another in
warm water so that the veneer strips are very
easy to bend. Apply waterproof wood glue to 2
strips and stick them together. Then place
them in the template while they are wet so that
the ends are evenly distributed across the right
and left. Slide in the stamp and press the
whole thing together in a vice or using a clamp.
After it has dried (approx. 24 hours), open the
template and remove the moulded parts. Re-
peat the whole process for the second back-
rest.
Now stick together the seat and the backrest.
Note: 2 mirror-inverted parts have to be
created.
Now adapt the backrest to the superstructure
and the wheelhouse.
Page 18
112
©
Krick Modelltechnik Knittlingen
Publicité
