Model Description; All Models; Model Designation - Hatco IHDCH Série Manuel D'installation

MODEL DESCRIPTION

All Models

All Hatco Intelligent Heated Display Cabinets are constructed
of stainless steel and aluminum with tempered glass top,
front, side, and door panels. Units are available with a black,
powdercoated finish or in stainless steel.
All models feature a touchscreen controller, a lighted Power
I/O (on/off) switch, an air heating/circulation system, a humidity
system, a USB port, and LED display lights. The inside of the
cabinet features removable base pieces as well as removable
front and rear crumb trays. Units are equipped with a 6ʹ
(1829 mm) power cord with plug.
NOTE: A water filter assembly is included with the unit to install
on the water supply line before it enters the unit.
NOTE: Refer to the OPTIONS AND ACCESSORIES section for
details on available accessories and factory-installed
options.
Model IHDCH-28
IHDCH-28 models can be configured with up to three adjustable
product support arms or up to three movable shelves. The
product support arms and shelves are capable of holding a
maximum pizza size of 22". Access to the cabinet is through
a rear, hinged door—which can be installed as either right or
left-hinged.
Adjustable
Product
Support Arm
Base
Pieces
Power I/O
(on/off)
Switch
Cooling
Fan Inlet
Touchscreen
Controller
Rear view of Model IHDCH-28

MODEL DESIGNATION

Door
Water
Inlet
Fitting
Overflow
Drain Pipe
USB
Port
Intelligent
Heated Display Cabinet
Humidified
Model IHDCH-45
IHDCH-45 models can be configured with up to six adjustable
product support arms. The product support arms are capable of
holding a maximum pizza size of 19-1/2". Access to the cabinet
is through rear sliding doors.
Base
Pieces
Sliding
Doors
Cooling
Fan Inlet
Power I/O
(on/off) Switch
Touchscreen
Controller
Front and Rear view of Model IHDCH-45
I H D C H - xx
Width (inches)
4
English
Adjustable Product
Support Arm
Overflow
Drain Pipe
USB
Port
Cooling Fan
Water
Outlet
Inlet
Fitting
Form No. IHDCH45M-0619