Model Description; All Models - Hatco CWB-S Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models

Hatco Slim Refrigerated Drop-In Wells are reliable and
versatile. Each unit has an insulated, stainless steel and
aluminized steel housing. The sides of the internal well are
completely surrounded with a copper evaporator coil to provide
even chilling from top to bottom. The Slim Refrigerated Drop-In
Well is controlled with a digital temperature controller and a
Power I/O (on/off) Switch housed in a single, remote-mountable
control panel. The control panel is connected to the condensing
unit with a 48" (1219 mm) power cord. A 6' (1829 mm) power
cord and plug connected to the control panel provides power
to the entire unit.
All models are designed to be mounted to the topside of various
types of countertop material including stainless steel, wood,
Corian, Swanstone, etc... Hatco Slim Refrigerated Drop-In
Wells are designed, manufactured, and tested to maintain safe
food holding temperatures.
CWB-S3
The ecoization logo identifies products designed to reflect
Hatco's commitment to improving, protecting, and preserving
the global environment. Hatco Slim Refrigerated Drop-In Wells
qualify for the ecoization logo through the use of green-friendly
insulation as well as a highly efficient condensing unit.
Each model of Slim Refrigerated Drop-In Well is supplied from
the factory with the appropriate number of 12" (305 mm) Pan
Support Bars, depending on the model's pan capacity.
Each individual well is capable of holding a variety of pan
combinations of full size, 1/2-size, 1/3-size, and/or 1/6-size
pans with accessory Adapter Bars.
Food Pans, Pan Support Bars, Adapter Bars, and other
accessories are available for the Slim Refrigerated Drop-In
Wells. Refer to the OPTIONS AND ACCESSORIES section in
this manual for details.
CWB-S1
Pans Not Included
4
CWB-S2
CWB-S4
Form No. CWBSM-1120
English