Model Description; All Models - Hatco CWBR Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models

Hatco Remote Refrigerated Drop-In Wells are reliable and
versatile. Each unit has an insulated, stainless steel and
aluminized steel housing. The sides of the internal well are
completely surrounded with a copper evaporator coil to provide
even cooling from top to bottom. The Remote Refrigerated
Drop-In Well is controlled with a digital temperature controller
and a Power I/O (on/off) Switch housed in a single, remote-
mounted control panel. All models are designed to be mounted
to the topside of various types of countertop material including
stainless steel, wood, Corian, Swanstone, etc... Hatco
Refrigerated Drop-In Wells are designed, manufactured, and
tested to maintain safe food holding temperatures.
Each model is supplied from the factory with the appropriate
number of 12" (305 mm) or 20" (508 mm) Pan Support Bars,
depending on the model's pan capacity.
Each individual well is capable of holding a variety of pan
combinations of full size, 1/2-size, 1/3-size, and/or 1/6-size
pans with accessory Adapter Bars.
Food Pans, Pan Support Bars, Adapter Bars, and other
accessories are available for the Remote Refrigerated Drop-In
Wells. Refer to the OPTIONS AND ACCESSORIES section in
this manual for details.
CWBR Models
CWBR models consist of a refrigerated well, a remote-
mounted control panel, a remote-mounted condensing unit,
and a thermal expansion valve (TXV valve, shipped loose). All
plumbing and electrical connections between the components
as well as to the electrical supply are the responsibility of the
end user and a qualified installer.
CWBR-3/CWBX-3
Pans Not Included
CWBR-S Models
CWBR-S models are available in one, two, three, and four pan
configurations. These models are "slim" designed and orient
full-size sheet pans with the long side facing the customer. The
slim design allows easy, reachable access to everything on the
unit.
CWBR-S models consist of a refrigerated well, a remote-
mounted control panel, a remote-mounted condensing unit,
and a thermal expansion valve (TXV valve, shipped loose).
These components must be connected to an end user-supplied
condensing unit. All plumbing and electrical connections
between the components as well as to the electrical supply are
the responsibility of the end user and a qualified installer.
CWBX Models
CWBX models consist of a refrigerated well with a solenoid
valve, a remote-mounted control panel, and a thermal expansion
valve (TXV valve, shipped loose). These components must
be connected to an end user-supplied condensing unit. All
plumbing and electrical connections between the components
as well as to the electrical supply are the responsibility of the
end user and a qualified installer.
CWBX-S Models
CWBX-S models are available in one, two, three, and four pan
configurations. These models are "slim" designed and orient
full-size sheet pans with the long side facing the customer. The
slim design allows easy, reachable access to everything on the
unit.
CWBX-S models consist of a refrigerated well with a solenoid
valve, a remote-mounted control panel, and a thermal expansion
valve (TXV valve, shipped loose). These components must
be connected to an end user-supplied condensing unit. All
plumbing and electrical connections between the components
as well as to the electrical supply are the responsibility of the
end user and a qualified installer.
CWBR-S3/CWBX-S3
Condensing Unit
(CWBR and CWBR-S
Models only)
4
English
Control Panel
l o w
(All Models)
A i r F
TXV Valve
(All Models)
Form No. CWBRM-0418