Model Description - Hatco HWBI-S Serie Manuel D'installation Et D'utilisation

English
All Models
All Slim Drop-In Heated Wells are reliable and versatile. Each
well has an insulated, stainless steel and aluminized steel
housing with a metal-sheathed heating element. The heating
element is controlled with a thermostatic temperature control
and a lighted Power I/O (on/off) switch housed in a remote
control enclosure. The remote control enclosure is connected
to the unit with 72" (1829 mm) flexible conduit assemblies. Slim
Drop-In Heated Wells are hardwired directly to a power source
for a secure and cord free serving area.
All models are equipped with EZ locking hardware and designed
to be mounted to the topside of a non-combustible countertop.
Slim Drop-In Heated Wells are designed, manufactured, and
tested to maintain safe food holding temperatures.
HWBI-S2, -S3, and -S4 Models
HWBI-SX models are capable of holding a variety of pan
combinations in each heated well.
• One full size pan
• Two 1/2-size pans with adapter bar.
• Three 1/3-size pans with adapter bars.
• Six 1/6-size pans with adapter bars.
• Two 7 quart (7 l) round pans with adapter top.
• Three 4 quart (4 l) round pans with adapter top.
Food Pans, Pan Support Bars, and Adapter Tops sold
separately (refer to the OPTIONS AND ACCESSORIES
section in this manual).
HWBISM-0722
HWBI-S4MA Model
HWBI-S3MA Model
HWBI-S Models

MODEL DESCRIPTION

HWBI-S2D, -S3D, and -S4D Models
HWBI-SXD models have the same capabilities as the
HWBI-SX models but are equipped with a separate drain in
each well. Each drain includes a 3/4" NPT drain fitting and a
flat drain screen that allows pans to stay level for consistent
temperatures.
HWBI-S2DA, -S3DA, and -S4DA Models
HWBI-SXDA models have the same capabilities as the
HWBI-SXD models but also are equipped with the Auto-Fill
feature.
HWBI-S2M, -S3M, and -S4M Models
HWBI-SXM models have the same capabilities as the
HWBI-SX models but are equipped with a manifold drain
assembly. The manifold drain assembly is equipped with 1"
NPT drain fittings. The drain fittings can be located on each end
of the unit or on the bottom of the end well. Each well connected
to the manifold drain assembly includes a flat drain screen that
allows pans to stay level for consistent temperatures.
HWBI-S2MA, -S3MA, and -S4MA Models
HWBI-SXMA models have the same capabilities as the
HWBI-SXM models but also are equipped with the Auto-Fill
feature.
NOTE: HWBI-S4 models for Canada have all controls in a
single control enclosure.
* HWBI-S4 models for Canada have all controls in a
single control enclosure.
5
*
HWBI-S2MA Model