English
Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed (plugs are supplied according to the application).
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: Specification label located on the back of the unit. See
label for serial number and verification of unit electrical
information.
Electrical Rating Chart
Model
Voltage
IHDCH-28
208
240
IHDCH-45
208
240
Dimensions
Width
Model
(A)
28-1/4"
IHDCH-28
(718 mm)
45-1/4"
IHDCH-45
(1149 mm)
Heated Chamber Dimensions: IHDCH-28 = 27-1/8" W x 25-1/2" D x 22-5/8" H (689 x 648 x 574 mm)
Food Product Riser Height = 1-1/4" (32 mm) *
F
3-1/2"
(88 mm)
* Available as an accessory.
Water Supply Specifications
Water Pressure = 20 psi (138 kPa) minimum, 50 psi (345 kPa) maximum
Form No. IHDCH45M-0619
WARNING
Watts
Amps
14.9
3090
12.9
14.9
3090
12.9
Depth
(B)
28-11/16"
30-3/16"
(728 mm)
(766 mm)
28-3/8"
30-3/16"
(721 mm)
(766 mm)
IHDCH-45 = 44-1/8" W x 25-1/2" D x 22-5/8" H (1121 x 648 x 574 mm)
A
4"
(102 mm)
G
D
Front View
NOTE: Receptacle not supplied by Hatco.
Plug Configuration
NEMA 6-20P
NEMA 6-20P
Height
Base
(C)
Width (D)
28"
(711 mm)
45"
(1143 mm)
C
IHDCH-45 shown
5
SPECIFICATIONS
NEMA 6-20P
Plug Configurations
Base
Support Arm
Depth (E)
Diameter (F)
27"
13-1/2 to 22"
(686 mm)
(343 to 559 mm)
27"
12 to 19-1/2"
(686 mm)
(305 to 495 mm)
B
3-3/4"
(95 mm)
E
Side View
Shipping Weight
150 lbs. (68 kg)
200 lbs. (91 kg)
Riser
Diameter (G)*
12"
(305 mm)
12"
(305 mm)