Specifications; Plug Configurations - Hatco HWB Série Manuel D'installation Et D'utilisation

English
HWB-11QT Models
HWB-11QT models are round Built-In Heated Wells that hold a
11 quart (10 l) pan. These models are designed to be mounted
to the topside of a non-combustible countertop or topside of
a combustible countertop using the appropriate countertop
mounting kit.
HWB-11QTD Models
HWB-11QTD models are the same as the HWB-11QT models
but is equipped with a drain. The drain includes a 3/4" NPT
drain fitting and flat drain screen that allows for pans to stay
level for consistent temperatures.
HWBI-11QT Models
HWBI-11QT models are the same as the HWB-11QT models
except the units are fully insulated. The insulated unit conserves
energy and preserves more consistent heating temperatures.
These models are designed to be mounted to the topside of a
non-combustible countertop using the appropriate countertop
mounting kit.
HWBI-11QTD Models
HWBI-11QTD models are the same as the HWB-11QTD models
except the units are fully insulated. The insulated unit conserves
energy and preserves more consistent heating temperatures.
These models are designed to be mounted to the topside of a
non-combustible countertop using the appropriate countertop
mounting kit.
HWBI-11QTDA Models
HWBI-11QTDA models have the same capabilities as the
HWBI-11QTD but are equipped the optional Auto-Fill feature.
The Auto-Fill feature fills and maintains the proper level of
water in the well automatically. These models are designed
to be mounted to the topside of a non-combustible countertop
using the appropriate countertop mounting kit.

Plug Configurations

Some units are supplied from the factory with an electrical
cord and plug installed. Plugs are supplied according to the
application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the bottom of the
unit or on the control enclosure. See label for serial
number and verification of unit electrical information.
Form No. HWBM-0518
MODEL DESCRIPTION
HWB-11QT
HWB-11QT, HWB-11QTD, and HWBI-11QT Models
NEMA 5-15P
CEE 7/7 Schuko
Plug Configurations
NOTE: Receptacle not supplied by Hatco.
7
HWB-11QTD
HWBI-11QTDA

SPECIFICATIONS

NEMA 6-15P NEMA 5-20P
BS-1363 AS 3112