Programming Day Off; Led Rgb Cup Tray Lighting Programming - La San Marco TOP 85 Emploi Et Entretien

Screen 11a
Screen 11b

8.6 Programming day off

Screen 12
DAY OFF
SUN

8.7 LED RGB cup tray lighting programming

Screen 13 a
Screen 13 b
WHITE
AUTO OFF programming screen.
This screen is used to activate/deactivate and set the automatic Off
for the machine every day.
Pressing the  /  buttons moves the selection.
If the CLOCk icon is selected, + / - are used to activate or deacti-
vate the AUTO ON function, if deactivated (CLOCk ICON CROSSED
OUT) the following appears instead of the hour and minutes - -. - -,
if activated, the  /  buttons can be used to go to the hour and
minutes to set the required Off time using the + / - buttons.
NOTE: if switching ON has been disabled, also Off and day off re-
main automatically disabled.
Press Ok to confirm the change.
Press NEXT to go to the next screen.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Day off programming screen.
This screen is used to activate/deactivate and set the day Off of the
week on which the machine will remain off.
Pressing the + / - buttons sets the day Off according to the se-
quence MON, TUE, WED, ThU, fRI, SAT, SUN, Off.
If Off is set, the function is not active.
Press Ok to confirm the change.
Press NEXT to go to the next screen.
NOTE: when the machine is off on the day OFF, it can always be
reactivated by pressing the OK button for 5 seconds. Press the
OK button again to turn it off again.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
lED RGB cup tray lighting programming screen.
This screen is used to activate/deactivate and set the colour of the
LED RGB cup tray lighting.
If the BULB icon is selected, + / - are used to activate or deactivate
the cup tray lighting function, if deactivated (BULB ICON CROSSED
OUT) Off will appear instead of the colour, if activated the  / 
buttons can be used to move to the colour for setting the desired
LED colour (white, blue, red or green) using the + / - buttons.
Default setting : WhITE
Press Ok to confirm the change.
Press NEXT to go to the next screen (no. 5) and resume the se-
quence of the user level programming screens.
If the NEXT button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
57