Programming The Doses - La San Marco TOP 85 Emploi Et Entretien

8.2 Programming the doses

Screen 5
SELECT DOSE
TO PROGRAM
Screen 6
Screen 7
COPY
Dose programming screen.
When this screen is displayed, the doses can be programmed for each
single button for every single unit.
Selecting one of the buttons accesses screen 6 and the selected button
will start to flash.
Press NEXT to go to screen 7.
If no button is selected within 30 seconds, the machine ready screen will
appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Selected button dose programming screen.
The selected button will start to flash and the screen indicating the
unit associated with the button will appear together with the cup
with the indication of the coffee dose (single or double, short or long)
and the dose set in ml (cc).
This screen can also be used to adjust the dose, increasing or de-
creasing it simply with the buttons + and –.
The dose can also be programmed by self-learning.
In this case, press the selected flashing button, start normal brewing
and when the button is pressed again, the dose in ml is shown on
the display. The programmed value will continue to flash, press Ok
to store the value and return to screen 5.
After the change, the programmed button will turn off to help un-
derstand which doses have been changed during that access to the
programming page.
If no button is selected within 30 seconds, the dose selection screen
will appear automatically (screen 5) without saving the change.
Pressing ESC returns to the dose selection screen (screen 5) without
saving the change.
Screen for copying dose programming to other units.
The  ;  buttons can be used to select one of the machine units
G2, (G3 and G4 if present).
Pressing Ok copies the programmed doses for unit 1 also to the
selected unit.
They can also be copied by pressing the continuous dose button
relative to the unit to which the doses should be copied from unit 1.
Pressing the Ok button and the continuous dose button for the unit
to be programmed will copy the programmed doses and return to
screen 4.
Obviously the individual doses of the various units can be pro-
grammed later using the procedure used for the previous screens.
Press NEXT to go to the next screen.
If the Ok button is not selected within 30 seconds, the machine
ready screen will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
55